Know how to fix a common problem with an air conditioner. One thing to consider is it could be the wrong settings on the thermostat. Heat pumps, for example, can accidentally be set to heating mode. Another problem can result from tripped circuit breakers. These can occur as a result of a temporary overload, such as when the AC starts up. If you’re unable to fix the problem yourself, it’s best to call a professional and avail of the best services for AC repair, Aravada CO.
Checking the circuit breaker box
If the AC unit is not working as it should, it’s possible that the circuit breaker has tripped. This breaker is often labeled or has a visible color indicator. If the switch is not stuck on, move it to the “Off” position and turn it back on. If it’s still stuck on, you may need to call an electrician. The electrical panel box is also a safety risk. If you notice that it smells like burning, the breaker may need to be reset. If the smell persists, turn off the power to your home. Otherwise, you may end up putting your home on fire.
Before doing any AC repairs, check the circuit breaker. Check for any short circuits or exposed wires. You may need to replace part of the wiring to get the AC back up and running. If the circuit breaker is not causing the problem, check for short circuits and other wiring issues. If you find any of these problems, call a technician to help you with the rest of the repair.
To test the circuit breaker, remove the panel and use a digital multimeter. Make sure that the lead is plugged into the COM and the red wire is connected to the V terminal. If the voltage is below 125 volts, it’s most likely a faulty circuit breaker and will need replacing. Follow the directions on the digital multimeter to check the circuit breaker or learn to use it properly.
Checking the condenser fan motor
One of the most frequently overlooked parts when performing AC repairs is the condenser fan motor. Although it may not seem like a major part of the AC system, it can be the source of a lot of problems. In some cases, the fan motor is merely the cause of the problem. Other problems include bad connections, blown fuses, or a failed start run capacitor. Fortunately, replacing the condenser fan motor is not too expensive.
One problem that is easy to overlook is the condenser fan not turning at all. When the power is turned off, you can hear the compressor running but no fans turning. Sometimes, the motor is simply stuck. In such a case, a fan motor can become stuck or even fall off its mount. While these issues may seem inconsequential, they can be a serious threat to the health of the entire condenser unit.
To troubleshoot this issue, you should first disconnect the power source and plug in a voltage detector. Once you have checked that the power is off, you should remove the service panel from the side of the condensing unit. It’s likely to be located near the area where the power connects to the condenser. Remove the service panel, which will have labels on it. Remove the service panel, and you’ll find the fan capacitor. The capacitor is cylindrical in shape, resembling a large battery with wires attached to its top.
Checking the condensate lines
When it comes to doing AC repairs, one of the most important things to do is to check the condensate lines and drain pan. When these parts become clogged, water can seep into your home and cause costly damage. Luckily, most air conditioners come with emergency shutoff systems to avoid such a disaster. However, if the drain pan is full or if water is leaking from the indoor unit, it may be time to call a professional.
To prevent the water from backing up, make sure to check the condensate lines and drain pan. If you find condensation in the condensate drain pan, it could damage your air conditioner and your home’s drywall, ceiling, and electrical wiring. Furthermore, the water could also corrode your air conditioning equipment and cause mold and insects to grow. If the condensate drain pan is backed up, it can also cause your HVAC system to stop working altogether.
If you notice any clogged condensate drain pan, make sure to check the drainage system to avoid damaging your indoor unit. This is an area that is often overlooked during routine A/C maintenance. Even HVAC technicians sometimes forget to check the condensate drain pan and do a quick cleaning. By performing regular maintenance, you can keep a unit free from algae and mold. The indoor air handler is typically located directly under the indoor unit and may be covered by a removable access panel.